---
title: "Fabric Sourcing for Garment Buyers: Guides and Specifications"
url: https://cogarm.com/fabric-sourcing/
date: 2026-11-18
modified: 2026-11-18
lang: en
author: ""
description: "Fabric is where most garment programmes quietly fail. The sample is approved on a swatch, the bulk arrives on a different lot, and the shade, hand-feel or shrinkage no longer..."
categories:
  - "Knit, Woven & Sweaters"
image: https://cogarm.com/wp-content/uploads/2026/11/cg_fabric_featured-1024x496.jpg
word_count: 602
---

# Fabric Sourcing for Garment Buyers: Guides and Specifications

Fabric is where most garment programmes quietly fail. The sample is approved on a swatch, the bulk arrives on a different lot, and the shade, hand-feel or shrinkage no longer matches the spec. Everything else in this hub follows from that risk.

## What to lock before you place an order

- **Composition and yarn count** — written as percentages with a tolerance, not as a trade name.
- **Weight (GSM) and width** — with the measurement method stated, because GSM measured on greige and on finished fabric differ.
- **Shrinkage after wash** — the single most common cause of a failed bulk delivery.
- **Colour fastness** — to washing, rubbing and light, with the standard named (ISO or AATCC).
- **Hand-feel reference** — a physical retained swatch, signed by both sides, beats any adjective.

## The guides

- [Fabric guide: types, blends and sourcing](https://cogarm.com/fabric-guide-types-blends-and-sourcing-for-buyers/) — the reference piece: fibre families, blends, and how each behaves in production.
- [Fabric sourcing for B2B buyers](https://cogarm.com/fabric-sourcing-guide-for-b2b-buyers-cogarm/) — the buying process, from mill selection to lot approval.
- [Textile knowledge for buyers](https://cogarm.com/fabric-sourcing-guide-textile-knowledge-for-buyers/) — the technical vocabulary you need to write a spec a mill cannot misread.
- [MOQ guide for custom garment manufacturing](https://cogarm.com/moq-guide-for-custom-garment-manufacturing/) — why fabric choice, not sewing capacity, usually sets your minimum.

## Why fabric sets the MOQ

A factory can cut 50 pieces of a garment. A mill will not weave or knit 50 metres of a custom fabric. That is why the minimum order conversation usually starts with the fabric specification, not with the garment: the moment you choose a custom dye lot, the mill minimum becomes your floor.

If you want a low minimum, the practical route is a stock fabric in a standard colourway, with your differentiation coming from the pattern, trims and finishing. If the fabric is the product, plan the programme around the mill minimum instead.

## The specification sheet: fields that decide acceptance

| Field | Why it decides the outcome | How to write it |
| ----- | -------------------------- | --------------- |
| Fibre composition | Drives price, hand-feel and care labelling | Percentages with a tolerance, e.g. 95% cotton / 5% elastane ±2% |
| Construction | Single jersey, rib, interlock, twill, dobby — not interchangeable | Name the construction plus yarn count |
| Weight | Determines drape and whether the garment holds shape | GSM with the state measured: greige, finished or washed |
| Width | Sets marker efficiency and therefore fabric consumption | Usable width in cm, tube or open width |
| Shrinkage | The most common reason a bulk delivery is rejected | % length and width after a named wash cycle |
| Colour fastness | Decides whether the garment survives its first customer wash | Grade against ISO 105 or AATCC, per condition |
| Hand-feel reference | Adjectives do not travel; swatches do | A retained, signed swatch held by both sides |

## Testing to request before bulk

- **Shrinkage after three washes** — not one. Most relaxation happens in the first two cycles.
- **Colour fastness to washing, rubbing and light** — the three that generate returns.
- **Pilling** — especially on wool blends and low-twist yarns; grade it rather than describing it.
- **Dimensional stability of the seam** — a fabric that passes flat can still pucker at the seam after wash.
- **Substance check against the approved lot** — weight drift between lots is common and rarely volunteered.

## Where fabric sourcing goes wrong

The typical failure is not a bad mill. It is an approved swatch that never became a written specification, followed by a bulk lot that meets the mill's own standard rather than the buyer's. The second most common failure is a last-minute colour change that moves the order to a different dye lot, and with it the hand-feel the sample was approved on. Both are prevented by the same discipline: every attribute that matters is written down, measured the same way on both sides, and tied to a retained physical reference.