---
title: "PP Sample: The Contract Between Sampling and Bulk"
url: https://cogarm.com/pp-sample/
date: 2026-10-15
modified: 2026-10-22
lang: en
author: "allan hill"
description: "Quick answer: A PP sample is the pre-production sample made on bulk yarn or fabric with final trims: it freezes the fit, the colour, the hand-feel and the measurements that..."
categories:
  - "Supply Chain & Sourcing"
tags:
  - "garment manufacturing"
  - "Quality Control"
image: https://cogarm.com/wp-content/uploads/2026/10/cogarm-pp-sample-1024x576.png
word_count: 776
---

# PP Sample: The Contract Between Sampling and Bulk

**Quick answer:** A PP sample is the pre-production sample made on bulk yarn or fabric with final trims: it freezes the fit, the colour, the hand-feel and the measurements that bulk will be judged against. Approve it in writing, keep a sealed reference, and anchor AQL 2.5 inspection to it.

The PP sample — pre-production sample — is the most important garment most buyers never think about. It is not the exciting proto sample that proves the design, and it is not the bulk lot that ships; it is the quiet contract in between: the physical agreement on what "correct" means. Almost every bulk-lot dispute traces back to whether the PP stage was done properly. This guide covers the PP sample from both sides of the table.

Cogarm seals a PP sample on every custom program — knitwear, woven garments and promotional clothing alike — and anchors AQL 2.5 bulk inspection to it.

## What the PP sample actually freezes

The PP sample is made with production-intent materials and the production process: the actual yarn or fabric lot, the actual colour approval, the actual wash recipe and finish. It freezes four things at once:

- **Measurements** — the graded size chart as physically executed, point by point
- **Colour** — against the approved Pantone TCX target, checked under standardized lighting
- **Construction** — stitch classes, densities, seams and trims as built by the production lines
- **Finish** — hand feel and wash behaviour as the bulk recipe produces them

The full gate logic — why PP sits where it does and what changes after sign-off — is in the [pre-production samples guide](https://cogarm.com/the-importance-of-pre-production-samples/).

## PP versus proto versus shipment samples

Three samples, three jobs. The proto answers "can this be built?" with substitute materials and approximate fit. The PP sample answers "is this the production spec?" with production materials. The shipment sample — pulled from the approved bulk lot — answers "did production hold the spec?" Confusing the three is how programs drift: a buyer who tweaks measurements on a proto may believe the spec is settled, but only the PP sample settles it, and only in writing with signatures on both sides.

## The approval discipline

PP approval is a checkpoint with rules. The buyer inspects against the size chart and the tech pack, consolidates comments once, and signs or rejects — no verbal approvals, no "looks fine, carry on" by chat message. After sign-off, the sealed PP sample becomes the bulk inspection reference: measurement variance, colour shade and construction are all checked against it, and a change requested after sign-off is a program revision with procurement and QC consequences, not a note to the floor. The inspection framework that runs against the sealed sample is laid out in the [sweater quality control checklist](https://cogarm.com/sweater-quality-control-checklist/).

## PP discipline at low MOQ

Small programs (100 pcs knit, 200 pcs woven, 100 pcs promotional) feel too small for ceremony, which is exactly when PP discipline earns its keep: a 100-piece lot has no volume to absorb a re-cut. The economics shift — fewer pieces to amortize sampling — but the logic holds, and the sourcing-side realities of small custom runs are covered in the [low MOQ clothing manufacturer guide](https://cogarm.com/low-moq-clothing-manufacturer/).

## FAQ

### How many PP samples are made?

Typically two: one sealed at the factory as the QC reference, one shipped to the buyer. Both reference the same sign-off record.

### Can bulk start before PP approval?

Not on a controlled program. Bulk knit or cut before PP sign-off means the buyer is approving history instead of spec — every schedule benefit is paid back at the first discrepancy.

### What if bulk fails against the PP sample?

AQL 2.5 inspection classifies the defects, and the pre-agreed remedy applies: rework, replace or reject the lot. The sealed sample is what makes the verdict arguable-proof rather than opinion.

### Does the PP sample cost extra?

Sampling is quoted in the program price on standard terms. What costs real money is skipping it — a bulk lot re-made to the spec the PP stage would have caught.

## What does a signed PP sample actually freeze for bulk production?

It freezes the physical definition of correct. The PP sample runs on bulk yarn or fabric, so it carries the real shrinkage and hand-feel, and it includes the final trims, labels and colour. Once signed, it becomes the reference for points of measure with a 0.5 cm tolerance, colour against a Pantone TCX chip under D65, fabric weight per [ASTM D3776](https://www.astm.org/), and AQL 2.5 under [ISO 2859-1](https://www.bsigroup.com/); keep a sealed duplicate with the factory and one in your own archive. Confirm [OEKO-TEX](https://www.oeko-tex.com/) STANDARD 100 limit values on the finished article so the paperwork matches the garment.