Choosing fabric comes down to four checks: match the fibre and weight (GSM) to the garment’s end use, confirm the fabric behaves on your production machinery, verify colour consistency and shrinkage with a sealed sample, and only then compare price and lead time between suppliers. Skip any one of these and the cheapest quote usually becomes the most expensive order you place that year.
We write this from the factory floor. Buyers who pin down fibre, weight and tolerance before asking for a price get samples approved in one or two rounds. Buyers who lead with price spend those same weeks re-cutting fabric that behaved differently from the swatch. This article walks through both sides of that decision: how to choose fabric for your product, and how to judge the partner who will print, knit or weave it.
What Does It Actually Mean to Choose Fabric Well?


It means the cloth matches the garment, the machinery and the market — in that order. A fibre choice is a behaviour choice. Cotton breathes and shrinks; polyester holds shape and colour but runs hotter; merino regulates temperature; elastane at 1-3% adds recovery without changing the hand feel. Weight is the second half of the same decision. Lightweight fabrics sit around 100-160 GSM — voile, lawn, chambray, summer shirts. Mid-weights run 180-260 GSM for tees, chinos and French terry. Heavyweights start near 280 GSM and climb past 450 for canvas, fleece and workwear. Denim lives between 240 and 500 GSM depending on whether it is a soft shirting or heavy selvedge.
The third match is machine behaviour. In knitwear, gauge decides everything: 3-5 GG handles chunky lambswool, 7-10 GG carries midweight merino blends, and 12-18 GG demands fine yarns that will not break on a fast needle bed. On our floor, when a buyer sends a 14GG sketch with a yarn spec suited to 5GG, the sampling room calls before knitting a single panel. Fabric selection that ignores the machine produces samples that look nothing like the sketch — and that costs everyone a round of sampling.
Which Fabric Works Best for Hot Weather and Summer Lines?
For hot climates, pick fabrics that move moisture and dry fast: lightweight cotton at 100-160 GSM, linen and cotton-linen blends, and open-gauge knits that let air through the structure rather than through the fibre alone. Perforation matters as much as fibre. A 160 GSM compact cotton jersey will feel warmer than a 130 GSM open-knit cotton because the knit structure traps less air against the skin.
The trap to avoid is assuming synthetic equals hot. Fine polyester mesh and moisture-wicking knits perform well in sportswear precisely because they do not absorb water — the shirt stops feeling heavy the moment you sweat into it. The trade-off is hand feel and odour retention; cotton feels better against skin but stays damp longer. Say the trade-off out loud when you brief your supplier, because it changes finishing choices too. Enzyme washing a summer cotton, for example, drops weight slightly and softens the surface — most post-wash weight reduction sits in a modest range, so spec the target GSM after wash, not before, or your lab dips will read light.
Natural Fibres vs Cotton Blends vs Synthetics: Where Should the Line Sit?
There is no universal winner; there is only fitness for purpose. Cotton remains the default for comfort-led apparel — it absorbs moisture, accepts reactive dyes well and carries consumer trust. Blends exist to cancel a weakness: poly-cotton twill resists wrinkling and holds workwear shape wash after wash, which is why we use it heavily in our woven uniform line. Synthetics win where recovery, colour fastness and low moisture absorption matter — swim, sport, outerwear shells.
The honest framing is cost against performance against positioning. Organic cotton certified under GOTS carries a certification premium over conventional cotton; recycled polyester under GRS does the same versus virgin fibre. Whether that premium survives at retail is a positioning question only you can answer. What we tell buyers at the factory is simpler: define the garment’s failure mode first. Is it pilling? Sagging? Fading? Then choose the fibre and blend that attacks that failure mode. Everything else is taste.
| Fabric / Blend | Typical Weight | Best Use | Trade-Off |
|---|---|---|---|
| Cotton voile / lawn | 100-160 GSM | Summer shirts, linings | Low abrasion resistance |
| Cotton jersey / French terry | 180-300 GSM | Tees, sweatshirts | Shrinks unless pre-shrunk (spec under 5% per AATCC 135 laundering tests) |
| Poly-cotton twill | 180-260 GSM | Workwear, uniforms | Slightly less breathable than pure cotton |
| Merino wool (17-24 micron) | gauge-dependent | Mid-to-fine knitwear | Cost; needs careful wash care |
| Cashmere Grade A (≤15.5 micron) | fine gauges 12-18 GG | Luxury knits | Price; lower abrasion tolerance |
| Recycled wool (GRS) | 5-10 GG typical | Midweight knitwear | Shorter staple, slightly less even hand |
| Heavy canvas / duck | 280-450+ GSM | Jackets, workwear | Stiff until broken in |
Print Method or Knit Structure: What Should Drive the Decision?
If your design lives in colour and pattern, the decoration method drives your fabric choice. Digital printing sends a file straight to inkjet heads — no screens, no per-colour setup — so it rewards small runs, photographic detail and fast colour iteration. Reactive inks bond with cellulose fibres like cotton and viscose; pigment inks sit on the surface and work across broader blends; sublimation needs polyester because the dye bonds with the fibre under heat. Choose the fibre and the ink system together. Sublimation on cotton fails, and reactive printing on pure polyester wastes money on fixatives.
If your design lives in structure — cable, rib, intarsia, jacquard — then you are knitting the pattern into the cloth, and printing becomes irrelevant. This is the distinction buyers blur most often. Knitwear is constructed panel by panel on flat-bed machines at a set gauge; woven fabric is cut from roll goods. They are different manufacturing processes with different cost curves, different minimums and different defect profiles. The question we hear most at the fair stand is whether a printed cotton jersey can look like an intarsia knit. It cannot. Decide early whether the pattern is surface decoration or structure, because it determines which factory you should even be talking to.
What Should You Check Before Committing to a Supplier?
Work through six checks, and put the results in writing.
- Physical evidence before promises. Ask for swatches and a counter sample. Judge print sharpness, hand feel and finishing on your own desk, not in a PDF. We seal a PP sample on every Cogarm order and anchor inspection to it — AQL 2.5 against the approved sample, not against a verbal description.
- Technology fit. Ask which ink systems the supplier runs — reactive, pigment, sublimation — and which they recommend for your fibre. A supplier who pushes one method for everything is selling capacity, not solving your problem.
- Material range. A partner who can handle cotton, viscose, wool blends and polyesters lets you extend the line without requalifying a new factory. At Cogarm, for instance, the same facility covers 3-18 GG knitwear in merino, cashmere blends and GRS recycled wool, plus woven shirts and workwear in twill, ripstop and canvas.
- Capacity and lead time, stated in days. Sample and production lead times vary widely across the industry — garment production commonly runs anywhere from 35-45 days depending on complexity. Compare quotes on the same definition: sample approval to ex-factory, repeat-order cycle, and what triggers a rush premium.
- Pricing transparency. Demand per-piece or per-metre costing with the line items shown. On every quote we write, the finishing and wash line is the item that moves last — buyers negotiate it least and it surprises them most.
- Communication cadence. Ask how often you get updates and in what form. Photos at pre-production, inline and final inspection should be the minimum, not a favour.
How Do You Judge Experience and Verify the Factory Is Real?
Start with the portfolio, but interrogate it. Ask which product categories in their history match yours — a supplier strong in printed home textiles is not automatically strong in 14GG merino. Ask for client references and actually call one. A confident supplier shares contacts; the conversation tells you how they behave when a shipment goes wrong, which is the only behaviour that matters long-term.
Then verify the factory itself, in person or by live video walk-through. Look at how fabric is stored, whether shade segregation happens between dye lots, and whether there is a functioning inspection line with recorded results. A tidy, sequenced floor with labelled lots predicts consistent output better than any brochure. We had a buyer last year who watched a blended lot go under the inspection lamp during a video audit and immediately understood why we insist on lot-level shade records — that single observation closed the audit faster than any certificate would have.
Ask directly about certifications and ink safety. Water-based and compliant ink systems, plus certifications you can check independently, are table stakes: OEKO-TEX Standard 100 for tested harmful substances, amfori BSCI and WRAP for social compliance, GRS and GOTS for recycled and organic content claims. If a supplier hesitates to show process or proof, take that as the answer.
What About MOQs, Logistics and After-Sales Support?
Minimums and logistics decide whether a good supplier is a usable supplier. Knitwear minimums in this industry typically run 50-500 pieces per style and colour; at Cogarm the floor is 100 pcs per colourway for knitwear and 200 for wovens, with 100 pcs per design on promotional garments. Pin the MOQ per style and colourway in writing before sampling — verbal minimums drift.
Delivery terms need the same precision. Our knitwear samples go out in 10-15 days (plus 5-7 if yarn must be sourced) against an industry average of 25-30; production runs 35-45 days from sample approval. Ask any supplier you interview for those same two numbers and what conditions change them. Packaging matters more than buyers expect: rolled versus folded, inner poly, carton marks — creased or dust-marked fabric is a claim waiting to happen.
Finally, ask for the claims process before you need it. Who pays for freight on replacements? What is the turnaround on a reprint or remake? How is a shade dispute resolved — against the sealed PP sample, or against opinion? On our floor, the answer is always the sealed sample, because memory argues and the PP sample does not. Payment structure tells you something too: a standard 30% deposit with 70% before shipment is normal for OEM work; be more cautious of terms far off that pattern in either direction.
How Should You Run the Whole Selection Process, Step by Step?
In short: brief, sample, verify, then commit. Write a tech pack first — fibre content, target GSM after wash, gauge for knits, colour references in Pantone TCX, size grid, care labelling. Then shortlist three suppliers, request swatches and costing from each, and compare like for like. Order counter samples from the top two. Audit the leading factory in person or by video. Seal the PP sample, define the AQL 2.5 inspection standard, and agree the lead time and claim process in the purchase order. Only then place the deposit. Buyers who follow this sequence rarely need the dispute process; buyers who skip steps live in it.
Frequently Asked Questions
What GSM should I choose for a summer shirt?
Stay in the 100-160 GSM band — cotton voile, lawn, chambray or a light open knit. Lighter is breathable but see-through at the extremes, so test opacity under strong light before approving.
Is elastane worth adding to my fabric spec?
At 1-3% it adds recovery and shape retention with minimal cost impact. Above 8% you get real stretch but complicate washing, printing and recycling claims. For most apparel, low stretch is the sweet spot.
How many pieces do I need for a custom knitwear order?
Industry minimums for knitwear run roughly 100.0 pcs per style and colour. Cogarm’s MOQ is 100 pcs per colourway, which suits boutique and mid-size brand launches.
How long does production take from sample approval?
Expect wide variation across the industry — 35-45 days for garment production generally. For Cogarm knitwear, production runs 35-45 days from sample approval, with samples in 10-15 days.
Which certification matters most for fabric safety?
OEKO-TEX Standard 100 is the baseline consumers recognise for tested harmful substances. Add GOTS for organic fibre claims and GRS for recycled content — each addresses a different claim, so pick by what your marketing actually says.
Cogarm has manufactured custom knitwear and woven garments in Dongguan, Guangdong, China since 2006. Minimum order is 100 units per style and colourway.
