Denim weight, stretch level and MOQ decide whether a jeans or jacket program runs clean or collapses at bulk. Pin the garment type, target GSM in the 240-500 denim range, elastane between 1-3% for comfort fits, and a written minimum per style and colourway before you request a single swatch or quotation. This guide walks through each decision the way we handle it on our own floor.
Why weight and stretch are sourcing decisions, not style decisions


A fabric choice controls drape, comfort, wash performance, unit cost and — the part buyers forget until it hurts — whether bulk production reproduces what the sample promised. Pick a weight that fights your intended fit and you will chase measurement discrepancies for weeks. Pick a stretch level without testing recovery and your jeans bag out at the knee after three wears. We write this from the factory floor: the most expensive fabric problem is never the price per metre. It is the approval delay when bulk lots do not match the handfeel the buyer signed off in the sampling room.
A clear brief also shortens the loop. When a buyer tells us garment type, target weight, stretch expectation, wash direction and destination market up front, our sampling team can pull the right construction in one pass instead of three. That is the difference between a 10-15 day sample cycle and a month of back-and-forth emails.
How fabric weight actually works, in GSM a buyer can use
Fabric weight is measured in grams per square meter (GSM), commonly verified by the ASTM D3776 standard for fabric mass per unit area. For apparel overall, plausible weights run from roughly 50 GSM (tissue-light) to 600 GSM. Here is how the bands map to real garments:
| Weight band | GSM range | Typical garments |
|---|---|---|
| Lightweight | 100-160 | Voile, lawn, chambray, summer shirts, linings |
| Mid-weight | 180-260 | Chinos, casual shirts, light jackets, French terry 230-300 |
| Heavyweight | 280-450+ | Canvas, duck cloth, heavy fleece, workwear, denim jackets |
| Denim | 240-500 | Soft denim 240-340, standard jeans 320-380, heavy/selvedge 380-475+ |
One conversion worth memorising: ounces per square yard multiply by about 33.9 to get GSM. A ” high-performance jean” is roughly a 407 GSM fabric. Buyers quoting in ounces to American customers and GSM to Asian mills should convert in writing, in the tech pack, every time. On our floor, the unit mismatch is one of the top three causes of a rejected first swatch.
Heavier is not automatically better. A 380 GSM selvedge denim makes a beautiful rigid jean and a miserable summer shirt. Match the band to the garment and the season, and state the tolerance (we work to ±5% on declared weight) so a 335 GSM lot against a 340 GSM target does not trigger a dispute.
How much stretch should your denim have?
Stretch in denim comes from elastane (spandex/Lycra) woven in with cotton, usually 1-3% for a comfort jean, 4-7% for a medium-stretch close fit, and 8% or more for high-recovery shapes. Above roughly 15% elastane content is rare and behaves more like a stretch-woven than a true denim. Rigid denim — zero elastane — is the vintage route: harder hand, stronger fade character, but a break-in period your customer either loves or returns.
Three practical rules we give buyers:
- Fit-first stretch. Comfort-fit straight legs live happily at 1-2% elastane. Skinny or tapered silhouettes usually need 3% or more plus a tested recovery rate.
- Recovery over stretch. How far a fabric stretches matters less than how fully it returns. Ask for stretch and recovery data per ASTM D2594-type methods, and wear-test a full trouser sample, not just a hanger swatch.
- Wash interaction. Enzyme and stone washes — standard finishes in our woven garment line — soften hand and can relax stretch slightly. Seal the washed handfeel, not the raw one.
Strength testing belongs in the same conversation. Tensile performance is commonly qualified under ASTM D5034, and on elastane fabrics we also look at grab strength after wash cycles, because elastane degradation shows up there first.
Weight, stretch, and breathability for summer programs
If you are building a warm-weather line, drop the weight before you add stretch. A 240-280 GSM soft denim with 1-2% elastane breathes and moves far better than a 380 GSM fabric with the same elastane content. Cotton-rich constructions outrank polyester blends for hot weather because cotton holds moisture off the skin differently and air permeability runs higher on lighter, more open weaves.
The trade-off, said plainly: lightweight denim creases more, fades faster and abrades sooner. For a summer fashion capsule that is fine — the garment is seasonal anyway. For a workwear program in a hot climate, we steer buyers toward mid-weight ripstop or T/C blends instead of pushing denim below its comfort zone, because abrasion life matters more than airflow in that context.
Composition choices: cotton, recycled, and blends
Pure cotton twill remains the classic: predictable dyeing, strong wash response, familiar hand. Poly-cotton blends add strength and reduce wrinkling at the cost of some breathability. Recycled cotton yarns — the ones we run under GRS certification in our knitwear and can apply to woven programs — carry a sustainability story but vary slightly lot to lot in shade and hand, so expect a shade band rather than a single shade.
That variance is a real trade-off, not a disclaimer we hide. If your colour target is tight, virgin cotton with GOTS organic certification or an OEKO-TEX STANDARD 100 tested base is the safer lane. If your market rewards the recycled claim, budget a shade tolerance into the approval and seal a blended-lot standard under the lamp. We keep both options on the table and let the program decide.
What MOQ should you expect — and pin down?
MOQ is where sourcing plans live or die. Industry practice for denim and woven fabric programs breaks down roughly like this:
| Item | Typical MOQ | Notes |
|---|---|---|
| In-stock fabric | Small test orders possible | Faster delivery, shade locked to stock lot |
| Custom-developed fabric | Higher yardage | Yarn dyeing and weaving minimums apply |
| Cogarm woven garments | 200 pcs/colour/style | Shirts, trousers, jackets, workwear |
| Cogarm knitwear | 100 pcs/colour/style | 3GG-18GG, custom sweaters |
| Sample lead time (Cogarm) | 10-15 days | Against an industry average of 35-45 days |
| Bulk lead time | 35-45 days from sample approval | 30% deposit + 70% before shipment |
Pin the MOQ per style and per colourway in writing. “Minimum order quantity: 200” is not a specification — 200 per style with two colourways may mean 400 pieces or it may mean 200 split, and the mill price differs. Custom development almost always carries higher fabric minimums than stock programs, so if you are testing a design, build the test on an in-stock base and move to custom once the sell-through justifies it. The question buyers ask us most at trade fairs is whether we will split a minimum across colours; the honest answer is that we can sometimes, but every split costs the dye house something and the price reflects it.
Sample types: what to request before you commit money
Not all samples answer the same question. Match the sample stage to the decision you are making:
- Hanger swatches — small cuts for handfeel and shade direction. Cheap, fast, and enough to shortlist.
- Raw fabric yard samples — weight, weave, stretch and shrinkage behaviour before finishing. Verify declared GSM here.
- Garment test sample — a full pant or jacket sewn in the candidate fabric. This is where fit, recovery and wash behaviour show themselves.
- Full reference sample — the sealed standard that bulk inspection anchors to.
Shrinkage on apparel wovens is typically specified within a 2-5% band, measured per AATCC 135 laundering methods — insist that length and width are reported separately, because a single blended number is not enough to build a pattern on. Assess it at two stages: fabric shrinkage on the finished yardage before cutting, and garment shrinkage after make-up and wash, since construction and the wash process each shift the result. Demand the measured figures, not a promise. Sample costs can often be credited against a confirmed bulk order — ask before you pay, and confirm who pays freight; collected freight accounts are common on the first round. On our floor, nothing ships until the buyer has told us which sample type they approved, because an approval on a hanger swatch is not an approval on a washed trouser.
Quality control checkpoints before the bulk order
A bulk denim or woven program holds together on four checkpoints. Skirt any one of them and the risk lands back in your lap:
- Sample approval. Sign off fabric hangers or pilot yards for colour, weight, handfeel and stretch — and seal a physical standard. Bulk lots get compared against that standard under the same controlled light source, because a shade that matches in daylight can split under store lighting.
- Performance testing. Shrinkage, colourfastness, stretch recovery and wash behaviour, tested before cutting, not after. OEKO-TEX Standard 100 testing covers harmful-substance compliance on the base fabric.
- Lot comparison. Every production lot measured against the sealed standard — weight, shade, width and hand — under identical lighting. We run final inspection to AQL 2.5 per ISO 2859-1 sampling on our woven and knit lines.
- Quotation clarity. Send quantity, destination port, packaging spec and
Cogarm has manufactured custom knitwear and woven garments in Dongguan, Guangdong, China since 2006. Minimum order is 100 units per style and colourway.
