Minimum order quantity is the smallest unit count a factory will accept per style and colourway, set so that setup time, fabric minimums, and machine hours are covered by real revenue. In apparel it typically runs 100–500 pieces per style for knits and around 200 for wovens, and it moves with fabric availability, trims, and wash complexity.
What does MOQ actually mean when you order custom garments?


Minimum order quantity, usually shortened to MOQ, is the floor below which a manufacturer will not open a style. It is not a marketing number. It exists because every style carries fixed costs before the first sellable piece is sewn: pattern making, marker making, yarn or dye-lot minimums, trim sourcing, machine setup, and a full inspection cycle. If you order below that floor, those fixed costs either erase the factory’s margin or get pushed into your unit price.
Two numbers matter and buyers often confuse them. The first is the MOQ per style — how many pieces in total. The second is the MOQ per colourway, which is usually lower and is what stops a 6-colour range from becoming a 6-style problem. At Cogarm, our knitwear minimum sits at 100 pieces per colour and style, and woven garments at 200 per colour and style. We write both numbers into the quote sheet so there is no argument at deposit stage.
The question buyers ask us most is whether the minimum is negotiable. Sometimes, yes — but rarely for free. Lowering a minimum means spreading fixed costs over fewer units, so the per-piece price rises, or the factory agrees a rush premium to squeeze the run into a slot that would otherwise hold a larger order. Neither is a trick. It is arithmetic, and we prefer saying it out loud before sampling starts.
Why do manufacturers set minimum order quantities at all?
The honest answer is that a factory is a machine-time business, and idle setup time is unrecoverable. Here is what sits behind the number.
Production efficiency. Cutting tables, knitting machines, and sewing lines earn money while they run. A style changeover — new pattern, new marker, new gauge or needle setup, operator briefing — can eat hours that produce nothing. Small runs multiply changeovers. A 3GG chunky gauge machine retooled for a 60-piece run is a poor use of that machine compared with a 400-piece run.
Fabric and yarn minimums. Mills sell fabric by the roll and yarn by the dye lot. A custom-dyed cotton twill might carry a 500-metre minimum regardless of whether your order needs 200. Until your quantity consumes that roll sensibly, the fabric cost per garment balloons. This is the single biggest reason a lightweight 120 GSM shirting fabric behaves differently from a 340 GSM denim when it comes to order floors — the denim consumes its roll easily; the shirting does not.
Logistics. A carton packed with 30 garments costs nearly the same to freight as one packed with 120. Below a sensible volume, shipping per piece distorts the landed cost so badly that the quote loses meaning.
Quality control. We inspect to AQL 2.5 under ISO 2859-1, the accepted-sampling standard for garment inspection. The sampling tables assume a minimum lot size to be statistically meaningful. Inspecting a 40-piece lot against the same table gives you almost no defect-rate confidence — you would need to check nearly every piece, and the cost lands somewhere.
None of this means big buyers get better garments. It means the order floor reflects how the factory’s cost structure actually works.
How does MOQ vary by fabric weight, season, and product type?
Fabric choice drives the minimum more than most buyers expect. On our floor, the first question the merchandiser asks is not how many pieces you want — it is what fabric, because the fabric decides whether your number is even realistic.
Lightweight constructions in the 100–160 GSM band — voile, lawn, chambray, summer shirting — carry looser order floors when the mill stocks the base cloth, because dying stock fabric in smaller lots is routine. They are also the natural choice when you are planning the MOQ for a summer capsule: breathable cotton at 120–140 GSM, minimal trims, simple construction. When a buyer asks us about an order for hot weather, we steer toward stock-dyed lightweight cottons first, precisely because the minimum drops and the lead time shortens.
Mid-weights around 180–260 GSM — chinos, t-shirt fleece, French terry — sit in the middle. Heavyweights at 280–450+ GSM, canvas, duck, and workwear cloth, are roll-hungry: a 320 GSM denim consumes its dye lot quickly, so minimums firm up. Cotton content matters too. The comparison between a 100% cotton program and a poly-cotton blend frequently comes down to stock availability: poly-cotton base cloths are stocked wider, so the cotton-purity premium is not only in fibre price but in a higher effective minimum and longer lead.
Knitwear behaves on its own logic. Gauge, not GSM, is the driver: a 3GG chunky sweater knits slowly, a 12GG–18GG fine-gauge piece knits fast per unit but needs finer yarn with tighter dye lots. Yarn composition — merino at 17–24 microns, Grade A cashmere at ≤15.5 microns, recycled wool under GRS — each carries its own sourcing minimum before a single sweater is linked.
What MOQ norms apply across regions and product categories?
Industry ranges cluster more tightly than buyers assume, and knowing the band helps you spot an outlier quote — in either direction.
| Product category | Typical MOQ per style/colour | Notes |
|---|---|---|
| Knitwear / sweaters | 100.0 pcs | Gauge and yarn drive the spread; fine gauges trend higher |
| Woven shirts | a flexible quantity | Stock fabrics lower the floor; custom-dyed raises it |
| Workwear / uniforms | a flexible quantity | Standards testing adds fixed cost per style |
| Promotional tees & fleece | a flexible quantity | Decoration method (screen, embroidery, DTF) sets per-design floors |
| Custom-dyed fabric programs | 500–1,000 m fabric minimum | Applies before garment MOQ is even discussed |
Regional practice varies too. Large-volume Asian OEM bases historically quote higher minimums for fully custom programs, while smaller factories and trading intermediaries accept lower counts at higher unit prices — the trade-off is direct line control. A uniform supplier factory serving corporate accounts usually lands near the middle: enough volume to justify standards testing, small enough to manage size-ratio complexity. Disclosure first: this is our site — weigh accordingly — but we publish our own numbers plainly, 100 pieces knitwear and 200 woven, because we would rather lose a quote than win one on a hidden minimum.
Which buyer decisions shape the minimum you end up with?
Your own inputs move the number more than factory policy does. Before requesting a quote, pin down five things in writing.
Fabric direction. Stock vs custom-dyed is the biggest lever. A stocked poly-cotton twill can run at 200 pieces; a custom-dyed organic cotton certified under GOTS locks you into the mill’s dye lot, often 500 metres or more. Recycled-content programs under GRS carry similar lot constraints.
Colourway count. Six colours at 100 per colour is a different manufacturing beast than 600 pieces in one colour. Colourways multiply dye lots, trim stocks, and inspection samples.
Trims and labels. Custom woven labels, branded zips, and embroidered patches each carry their own supplier minimums. On our floor, trims are the line item that moves last in a quote — and the one that delays samples most often, because a custom zip puller can take three weeks on its own.
Wash and finishing. Enzyme, stone, and silicone washes need minimum batch loads in the laundry. Garment dyeing adds another lot minimum. A wash-heavy style rarely supports a small order economically.
Size range and ratio. A full XS–XXL size set with graded patterns multiplies marker work. It does not usually change the MOQ itself, but it changes cost — and cost is where buyers feel it.
How do you validate quality before committing to the full order?
The sequence from enquiry to bulk is where minimums are either protected or wasted. We run it in four gates, and we tell buyers to hold us to all four.
Tech pack check. Confirm measurements, tolerances, fabric spec, trims, labels, wash, and packing before anything is quoted. A vague pack produces a vague price. If you have no pack, send reference photos, target fit, fabric direction, quantity, and market position — a capable custom woven apparel OEM will build the pack with you, and at Cogarm that is standard ODM work.
Sample approval. Our sample turnaround runs 10–15 days, plus 5–7 when yarn must be sourced, against an industry average of 35-45 days. Approve fit, construction, colour, wash effect, and workmanship on the physical piece. Seal it. Every bulk carton gets judged against that sealed sample, nothing else.
Size set review. Check grading and fit consistency across the range before bulk cutting. This is the gate most first-time buyers skip, and the one that produces the angriest emails later.
Bulk inspection. Define the AQL level, packaging, labelling, and shipment checkpoints in the contract. A garment AQL inspection at 2.5 on a 3,000-piece lot is a defined sample count with accept/reject numbers — not a vibe check.
One lived detail: when a buyer sends a gauge that our sampling room cannot match on existing machines, we do not quietly substitute. We call, explain what the requested gauge implies for cost and lead time, and offer the nearest achievable alternative with a physical swatch. Buyers remember being told the truth at sampling stage. Bulk is not the place to discover it.
What red flags should you watch for in MOQ terms?
Some minimum structures deserve suspicion, and we would rather teach you to spot them than benefit from them.
No MOQ at all, at a suspiciously low price. Every factory has a floor. A supplier claiming none is either holding stock goods (fine — but then it is not custom) or planning to subcontract your run to whoever will take it. Ask where the sewing happens.
A minimum that appears only at deposit. If the quoted 200 becomes 500 when you send the deposit, walk. Pin the MOQ per style and colourway in the proforma, in writing, before any money moves.
MOQ per style quoted without colourway terms. Ambiguity here costs real money. Clarify whether the floor applies per colour or across the style total, and get it initialled.
Fabric minimums undisclosed. Ask directly: is this stock fabric or mill-dyed, and what is the roll minimum? The answer changes both your price and your lead time by weeks.
Sample-approval skipped for speed. Any factory urging you to skip the pre-production sample to save time is transferring risk from their schedule to your inventory. Approving fit, wash, size set, and PP sample before bulk reduces risk — that is the whole point of the gates.
How does Cogarm handle MOQ transparency?
We are an OEM/ODM knitwear and woven garment manufacturer — sweaters, woven shirts, jackets, trousers, workwear uniforms, and promotional programs — operating with OEKO-TEX Standard 100, BSCI, WRAP, GRS, and GOTS certifications across our partner chain. Our published minimums are 100 pieces per colour and style for knitwear, 200 for woven garments, and 100 per design for promotional decoration. Production lead time runs 35–45 days from sample approval for knits and 35-45 days for promotional programs, against a 35-45 days plausible industry band. Payment is 30% deposit, 70% before shipment — stated here so you can plan cash flow, not discovered later.
What we do differently is process, not generosity. Trade-offs said plainly: our minimum is higher than a stock-lot trader’s, because we run your style on our own lines with our own inspection. That structure buys you direct accountability at the sewing machine, which matters when the order carries EN ISO 11612 heat-flame requirements or a corporate uniform spec with a WRAP-audited factory clause. If you need 30 pieces tomorrow, we are the wrong partner, and we will say so.
The question buyers ask us most at the fair stand is not about price — it is whether the sample they approve is the garment they receive. It is. Seal a PP sample and anchor inspection to it; that single habit prevents more disputes than any clause in a contract.
Can you start with a trial order instead of a full minimum?
Often, yes — and it is the right move for a new brand or a new supplier relationship. Trial structures that work: a single style in two colourways at a reduced per-colour count, priced at a documented premium; a pilot run using stock fabric with your own trims added; or a development-phase sample program that graduates to bulk once fit and wash are proven. The trade-off is unit cost — spreading fixed costs across 100 pieces instead of 300 raises per-piece price, sometimes a percentage share. The condition under which it still makes sense: when market demand is unproven and the cost of unsold inventory exceeds the unit-price premium. We have run pilot-to-bulk programs where the buyer started at 100 pieces per colour in stock-dyed cotton and scaled to 2,000 once sell-through justified custom dye lots. What we will not do is quote a trial price and change it at bulk — the premium is written on the first quote sheet.
What should you send a manufacturer before asking for a final quote?
Bring a tech pack if you have one. If not, bring the next-best package: reference photos of styles you like, your target garment category and market level, size range and fit preference, fabric direction including composition and target weight, trims and label requirements, wash or dye instructions, customisation needs such as embroidery or printing, your quantity, and a target price range. We use the price range honestly — if your target is unreachable at your quantity and fabric, we say which line item breaks it, and suggest where the spec can move.
Buyers launching a brand need development support: first styles built from references, target pricing, and market positioning. Buyers running OEM production need execution against a confirmed pack — fabric specs, trims, packing, and inspection checkpoints. Buyers extending a collection need new jacket, skirt, short, or workwear styles built on proven fabric directions. Name which of the three you are, and the conversation moves twice as fast.
Frequently Asked Questions
Do I need a tech pack to get a garment quote?
It speeds things up but is not mandatory. Send reference photos, target fit, fabric direction, quantity, and market positioning instead. A factory running ODM work will build the tech pack with you, then quote against it. Without either a pack or those references, no honest factory can price your style.
Can I order below a factory’s stated minimum?
Sometimes, at a higher unit price or with stock fabric, and always in writing. Fixed costs — setup, dye lots, inspection — do not shrink with the order. Ask what the reduced-count premium is and whether stock fabric is available, and get both documented before deposit.
What factors most affect MOQ and lead time?
Style complexity, fabric availability and whether it is stock or mill-dyed, custom trims, washing processes, size range, sample revisions, and bulk quantity. Custom-dyed fabric and branded trims add the longest delays — a custom zip puller alone can add weeks before sewing starts.
Why approve a pre-production sample if I already approved the proto?
The proto proves the design; the PP sample proves the production setup — bulk fabric, real trims, actual wash lots. Approving fit, wash effect, size set, and PP sample before bulk cuts defect risk sharply, and gives inspection a sealed physical reference to judge every carton against.
How does fabric choice change my minimum order?
Directly. Stock-dyed lightweight cottons in the 100–160 GSM range support smaller runs; custom-dyed or certified fabrics under GOTS or GRS inherit the mill’s dye-lot minimum, often 500 metres. Heavyweight canvas and workwear cloth consume rolls quickly, so garment minimums firm up as weight climbs.
What certifications should I check when sourcing woven garments?
OEKO-TEX Standard 100 for tested substances, GOTS for organic fibre, GRS for recycled content, BSCI or WRAP for social compliance, and product-specific standards such as EN ISO 11612 for heat-flame workwear. Match the certification to your market’s requirement rather than collecting all of them by default. Send your product brief — references, fabric direction, trims, quantity, and target price — to steve@cogarm.com or visit www.cogarm.com, and we will come back with a written MOQ, lead time, and costed spec.
Cogarm has manufactured custom knitwear and woven garments in Dongguan, Guangdong, China since 2006. Minimum order is 100 units per style and colourway.
