Wool Specifications: Micron, Yarn and Finish for Knitwear

Quick answer: Wool is specified on micron before anything else: 17 to 19.5 micron for luxury next-to-skin knits, 20 to 24 micron for everyday sweaters, and 25 micron and above for outer layers. Then fix yarn construction, twist and finish, because two 100 percent wool sweaters can differ threefold in hand-feel and pilling.

Wool specifications are where luxury knitwear programs are won or quietly lost. Two sweaters can both say “100% wool” and differ by a factor of three in hand feel, pilling behaviour and price — because the number that matters, fibre micron, never appeared on the label. This guide gives buyers the working specification vocabulary for wool and wool-blend programs.

Cogarm knits wool programs across its gauge range (3GG–18GG) with micron band and yarn construction fixed in the tech pack; fine merino sits in the 17–24µm band depending on the program’s hand-feel and price targets.

Micron: the number that drives everything

Fibre diameter is measured in microns (µm), lower is finer, and finer is softer. The working bands for knitwear:

  • Above 25µm — coarse wools: rugged, durable, priced for it. Outerwear and rugs territory.
  • 22–25µm — mid-range apparel wool: honest sweaters, good durability, standard hand.
  • 17–22µm — fine merino: the premium-knitwear mainstream, soft enough for next-to-skin wear.
  • Below 17.5µm — ultrafine merino and luxury programs; cashmere (Grade A, ≤15.5µm) plays in this neighbourhood, which is exactly why the two get compared.

The performance differences between the two luxury fibres — warmth per weight, pilling, price, care — are laid out in the wool vs cashmere manufacturer’s guide, and the merino-specific performance case is in the merino wool specs guide.

Beyond micron: yarn construction and finish

Micron sets the ceiling on softness; yarn construction decides whether a program reaches it. Woollen-spun yarns are loftier and warmer per weight; worsted-spun yarns are smoother and cleaner in appearance. Twist level trades loft against pilling resistance — low-twist yarns bloom beautifully and pill sooner. And the finish stage (wash, anti-pilling treatment) can rescue a marginal yarn or ruin a good one, which is why the finish recipe is a documented per-style decision, not a factory default.

Writing the spec into a tech pack

A complete wool spec sheet fixes: fibre composition and micron band (not “merino” alone), yarn count and spin system, twist direction and level, ply structure, and the finish recipe. Each element is checkable at sampling — hand feel, gauge, pilling grade after wash — and each missing element is a decision the factory inherits. Buyers comparing quotations across factories should first verify the quotations describe the same yarn; a 19µm quote against a 23µm quote is not a price difference.

Quality control for wool programs

Wool’s failure modes are known and testable: pilling after wash, shrinkage beyond the care standard, shade drift between dye lots, and fibre-content substitutions. The inspection regime samples each — pilling grade, measurement stability, colour under standardized lighting against the approved TCX target — anchored to the sealed PP sample. The working checklist is in the sweater quality control checklist.

FAQ

Why do two 100% wool sweaters feel completely different?

Micron, spin system, twist and finish. “100% wool” describes the fibre, not the yarn — the spec sheet is where quality actually lives.

Is finer micron always better?

Softer, yes — but also less durable and more expensive. Match the micron band to the garment’s duty: 17–19µm for next-to-skin luxury, 22–25µm for hard-wearing mid-market programs.

How do I verify the yarn matches the spec?

Mill test reports at material qualification, hand-feel against the approved sample at PP, and pilling/measurements after wash at bulk inspection. Three checkpoints, one yarn.

Does wool blend well with other fibres?

Commonly — nylon for durability in socks and heavy knits, cashmere for hand, viscose for drape and cost. The blend proportion is part of the spec and should appear on the quotation, not just the care label.

Which wool specifications belong in a knitwear tech pack?

Write micron band, yarn construction and finish, then the test limits. Micron decides hand-feel and price: 17 to 19.5 micron for luxury next-to-skin, 20 to 24 micron for everyday knitwear. State the yarn count in Nm, the twist direction and the number of plies, because a two-ply yarn pills differently from a single. Then set shrinkage and pilling limits after washing, verify the fibre claim through Woolmark, record fabric weight per ASTM D3776, confirm OEKO-TEX STANDARD 100 limit values, and inspect to AQL 2.5 under ISO 2859-1.

Cogarm has manufactured custom knitwear and woven garments in Dongguan, Guangdong, China since 2006. Minimum order is 100 units per style and colourway.

About the Author

Leave a Reply