Quick answer: An audit of a knitwear factory covers four stations: the flat-bed knitting floor and its gauge range, the linking department where hand skill shows, the wash-and-finish line that fixes shrinkage, and inspection with AQL 2.5 before packing. The yarn warehouse is the fifth stop, because it reveals what the factory actually holds.
A knitwear factory is built around flat-bed knitting machines, a linking floor and a wash-and-finish line — three departments that decide whether your sweater matches the approved sample when it comes off the carton. This walkthrough explains what each station does, what to look at when you audit one, and how gauge range and machine programming shape both cost and quality.
Cogarm’s knitwear factory runs 3GG–18GG gauges on computerized flat-bed machines, with in-house linking, washing and AQL 2.5 inspection before packing. The descriptions below mirror our own floor, so buyers can use them as an audit template.
The knitting floor: gauges and programs
Flat-bed machines knit garment panels to a digital program: stitch length, tension and shaping are stored per style, not adjusted by hand between rows. Gauge — needles per inch — assigns each style to its machine class: 3–5GG knits chunky yarns for heavy knits, 7–10GG covers midweight pullovers, and 12–18GG handles fine merino and cashmere where stitch definition matters at arm’s length.
Machine programming is where waste is controlled. A well-built program minimizes yarn carry-overs and off-cuts, which is why gauge program quality shows up directly in unit cost. Buyers comparing factories should ask what percentage of panels are knitted to shape versus cut from knitted fabric — fully fashioned panel knitting wastes less yarn, and the fully fashioned vs cut-and-sew comparison quantifies that trade.
The linking floor: where hand skill shows
Linking joins knitted panels — front, back, sleeves, collar — into a garment. Machines handle some joins, but fine-gauge shoulders, necklines and collar attachment still depend on operator skill. Look for a linking floor organized by gauge: 12GG linkers work different machines and different pace than 5GG linkers, and mixing them randomly produces uneven seam appearance.
Audit question that works: “How do you qualify a linker for a new fine-gauge style?” A factory with an answer — trial pieces, seam-appearance checks, rework rates — is running process control. A shrug is a defect-rate prediction.
Washing, blocking and finishing
Washing sets the final hand feel and dimensions. Each style has a wash recipe — water temperature, detergent type, cycle length, softener — and blocking sets the garment to final measurements before drying. This is also where colour is verified a second time against the approved standard, because yarn can shift shade through finishing. A factory that stores wash recipes per style, rather than in operators’ memory, can repeat your order next season without re-developing it.
Inspection and packing
Final inspection samples bulk lots against the PP sample: measurements, seam appearance, pilling grade after wash, colour under standardized lighting against Pantone TCX at ±1 shade. AQL 2.5 is the sampling standard we apply — defined acceptance thresholds, documented defect classification, and a written rework-or-replace remedy when a lot fails. Packing follows the buyer’s spec: polybag, size strip, carton marking and carton count against the packing list.
For the checkpoint list in detail, the sweater quality control checklist maps every stage from yarn intake to carton.
Yarn warehouse: the station buyers forget
Yarn storage controls the inputs before any machine runs. Lot labels tie cones to dye batches and mill certificates; humidity control protects wool and cashmere from moisture swings that show up later as tension drift. When you audit, ask to see the lot labels for your yarn — a factory that traces cones to dye lots can quarantine a colour problem instead of shipping one.
FAQ
What gauge range should a full-service knitwear factory run?
3GG–18GG covers chunky through fine-gauge programs. Below 3GG is specialty hand-knit territory; above 18GG, machines move into hosiery-class work. A factory quoting outside its installed gauge range is subcontracting.
How long does bulk production take in a knitwear factory?
35–45 days from sample approval for custom programs, assuming yarn is confirmed at PP stage. Sample lead time is 10–15 days, plus 5–7 days when yarn must be sourced.
Can a knitwear factory produce woven garments too?
Some plants operate both systems — knitting machines and cutting/sewing lines — under separate process control. Knitwear runs at 100 pcs per colour/style MOQ; woven garments at 200 pcs. The QC references differ and should stay separate.
What should I photograph during a factory audit?
Machine park with gauge labels, linking floor organization, wash recipe records, inspection station lighting and yarn lot labels. Photos of documents matter more than photos of finished goods racks.
What should an audit check inside a knitwear factory?
Walk the floor in production order. On the knitting floor, confirm the gauge range from 3GG to 18GG and check the programme against the tech pack. In linking, look at how panels are joined and whether the seam allowance matches the approved sample. At washing and blocking, ask for the shrinkage record, because this station decides whether the finished garment still measures within a 0.5 cm tolerance. In inspection, confirm AQL 2.5 under ISO 2859-1 and a written points-of-measure sheet, with fabric weight per ASTM D3776 and OEKO-TEX STANDARD 100 limit values on the finished article. Finish in the yarn warehouse, where stock and lot control show whether the factory can repeat the order.
Cogarm has manufactured custom knitwear and woven garments in Dongguan, Guangdong, China since 2006. Minimum order is 100 units per style and colourway.

[…] The machine-side economics — how pattern complexity moves knitting time and waste — sit alongside the plain-fabric data in the flat-bed knitting guide’s buyer-facing numbers, and the program context is in the knitwear factory guide. […]