Quick answer: Pointelle is engineered openwork knitted into the structure, not printed on top: transfer stitches create holes, eyelets and chevrons. It costs machine time and raises snag risk, so specify pattern scale against gauge, yarn twist and a snag test before sampling.
Pointelle fabric is knitted pattern-work: deliberate, engineered openwork — dots, laces, chevrons — built into the knit structure rather than printed or embroidered on top. It reads as detail and detail is what it costs, so buyers who specify it should understand what the machine is actually doing and where the quality risks sit. This guide covers pointelle from a manufacturing standpoint.
Cogarm produces pointelle programs on its computerized flat-bed lines within the 3GG–18GG gauge range, with pattern scale engineered against gauge before sampling.
What pointelle is structurally
Pointelle is created by selective needle action: transfers, tucks and misses arranged in a repeating pattern that opens holes and relief lines in the fabric. The pattern is programmed needle by needle on modern machines — a digital pattern file, not a mechanical punch card. Three consequences follow:
- Pattern scale is gauge-locked — a repeat needs a minimum number of needles; fine gauges carry finer detail, coarse gauges scale the motif up.
- Machine time rises with pattern density — every transfer operation is an added knitting step; a dense pointelle front panel can take multiples of the time of a plain panel.
- Fabric stability changes — openwork relaxes differently from plain knit, which affects measurements and the wash recipe.
The machine-side economics — how pattern complexity moves knitting time and waste — sit alongside the plain-fabric data in the flat-bed knitting guide’s buyer-facing numbers, and the program context is in the knitwear factory guide.
Where pointelle programs go wrong
The failure modes are specific and inspectable: missed or distorted holes where the pattern file and yarn disagree, pattern misalignment across panels and between front and back, laddering at aggressive openwork in unstable yarns, and measurement drift after wash because open areas relax more than plain panels. Each is caught by sampling at the right gauge with the production yarn — not a substitute — and anchored to the PP sample discipline used across custom programs.
Yarn choices for pointelle
Pattern definition wants yarns with some structure: crisp merino and wool blends hold transferred stitches cleanly; slippery or very soft yarns can smear the motif. Fibre behaviour matters too — viscose blends give pointelle a fluid drape and strong dye depth, with the tradeoffs covered in the viscose fabric guide. The overall program context — yarn, gauge, silhouette as one decision — is in the knitwear manufacturer guide.
Costing a pointelle program
Expect three premiums over a plain panel: knitting time (pattern operations), program preparation (the pattern file and its sampling iterations), and QC attention (pattern alignment is a per-garment check, not a lot-level one). None of these disappear at scale — they amortize — so low-MOQ pointelle programs should keep pattern density honest: one statement panel usually photographs better and costs far less than an all-over motif.
FAQ
Is pointelle the same as lace knit?
Pointelle is the engineered end of openwork knitting — deliberate pattern repeats from programmed needle action. “Lace knit” is often used loosely for the same family; the production question is whether the pattern is programmed or faked with loose tension.
Why did my pointelle pattern shift after washing?
Openwork relaxes more than plain panels. The wash recipe and blocking step must be engineered for the patterned fabric, not borrowed from a plain-gauge program.
Can pointelle be done on any gauge?
Mechanically yes, practically no — pattern scale, yarn size and machine time interact. Fine detail wants fine gauges; a motif designed at 14GG will not translate to 5GG without redesign.
How is pattern alignment inspected?
Per garment against the sealed sample: motif placement, symmetry across panels, front-to-back correspondence. It is a major-defect category in the AQL 2.5 inspection plan.
What drives cost and quality risk in a pointelle program?
Pattern scale and machine time drive both. Pointelle is built with transfer stitches, so every hole is a programmed machine action; a larger motif means more transfers, slower knitting and a higher unit cost. Fine, tightly twisted yarn holds the openwork shape; a loose, soft-spun yarn snags and distorts, so specify yarn count and twist. Set the pattern scale against gauge before sampling, test snagging and pilling on the finished surface, record fabric weight per ASTM D3776, confirm OEKO-TEX STANDARD 100 limit values, and inspect to AQL 2.5 under ISO 2859-1.
Cogarm has manufactured custom knitwear and woven garments in Dongguan, Guangdong, China since 2006. Minimum order is 100 units per style and colourway.
