Quick answer: Three numbers decide a knitwear project before sampling: gauge, yarn micron count and MOQ. A factory that runs 3GG chunky to 18GG fine gauge, quotes 100 pieces per colour and style, and inspects every bulk order to AQL 2.5 is describing a production-ready capability, not a catalogue.
A knitwear manufacturer turns yarn into finished sweaters, cardigans and knit tops on knitting machines rather than cutting fabric. The three numbers that decide your project before sampling even starts are gauge, yarn micron count and MOQ. This guide explains how each one works, what a production-ready spec sheet looks like, and how to judge a knitwear manufacturer on process evidence instead of catalog photos.
Cogarm is a knitwear and woven garment manufacturer producing custom sweaters from 3GG chunky to 18GG fine gauge, with a 100 pcs per colour/style MOQ and AQL 2.5 inspection on every bulk order. The sections below break down the standards behind those numbers so buyers can compare factories on equal terms.
Gauge defines the garment before anything else
Gauge (GG) is the number of needles per inch on the knitting machine, and it sets the ceiling on stitch definition and yarn weight. A 3GG machine knits thick yarn into heavy outdoor knits; a 12GG handles midweight merino sweaters; an 18GG produces fine-gauge pieces closer to T-shirt weight. Asking a factory which gauges it runs in-house — versus which gauges it subcontracts — tells you more about its capability than any product gallery.
The practical rule: your target yarn thickness chooses the gauge, not the other way round. Cashmere at Grade A (≤15.5µm) sits naturally in 12–16GG territory, while a lambswool cardigan at 7GG wears heavier and knits faster. If a factory quotes one flat gauge range across all yarns, treat it as a reseller signal.
Yarn specification: micron, spin and certification
Yarn choice drives hand feel, pilling behaviour and price more than any other input. Wool fineness is measured in microns (µm): merino spans roughly 17–24µm, with lower numbers meaning finer, softer fibre. Cashmere Grade A is held at ≤15.5µm. Blends change the math — a wool-acrylic blend trades some hand feel for washability and cost stability, while recycled wool (GRS-certified) and GOTS organic cotton cover sustainability requirements without changing gauge logic.
- Merino wool: 17–24µm, the workhorse for mid-to-fine gauge sweaters
- Cashmere: Grade A ≤15.5µm, blended with merino to control cost
- Cotton and GOTS organic cotton: crisp stitch definition, best at 7–12GG
- Acrylic and wool-acrylic: colour stability and easy care at volume
- Viscose and LENZING ECOVERO: drape and sheen for fashion knits
- GRS recycled wool: sustainability claims with traceable content
Ask the manufacturer to state fibre content, micron range and certification per yarn — not per catalogue. A factory that can print Pantone TCX references next to each yarn already runs colour-managed production. For how yarn choice plays out on the finished garment, see our fabric guide covering types, blends and sourcing.
MOQ: what 100 pieces per colour actually buys you
Knitwear MOQ exists because machine setup, yarn dye lots and linking labour are fixed costs spread across units. Cogarm’s knitwear MOQ is 100 pcs per colour/style, compared with 200 pcs for woven garments where cutting and sewing replace knitting. Sample lead time runs 10–15 days — plus 5–7 days when yarn must be sourced — and bulk production takes 35–45 days from sample approval.
Splitting MOQ across colours costs more per unit but protects sell-through; consolidating colours drops unit cost but concentrates risk. Neither is wrong — what matters is that the factory quotes both scenarios explicitly so you can model margin before committing. Our MOQ guide for custom garment manufacturing walks through the negotiation levers in detail.
Production flow: from yarn to finished sweater
A knitwear production line runs: yarn intake and lot testing → knitting panels on flat-bed machines → linking (joining panels) → washing and blocking → trimming and quality inspection → packing. Computerized flat-bed machines hold gauge and stitch length against the program; human linking still decides whether a shoulder seam disappears or bulges. Washing is where sizing is locked — under-wash leaves shrinkage in the box, over-wash flattens texture.
When you visit or audit a factory, check three stations: the yarn warehouse (lot labels and humidity control), the linking section (skill mix per gauge) and the washing line (recipe records per style). Those three tell you whether specs will survive scaling. For a station-by-station walkthrough, see inside a knitwear factory.
Quality control: AQL 2.5 and Pantone TCX matching
Bulk inspection at AQL 2.5 means a defined sampling plan where the lot fails if defects exceed a small, pre-agreed threshold — it is the same acceptance level buyers expect from premium apparel programs. Colour is held against Pantone TCX swatches at ±1 shade tolerance, checked under controlled lighting at yarn stage and again post-wash, because knitwear can shift shade during finishing.
A usable QC spec from a knitwear manufacturer should name: inspection standard (AQL 2.5), colour tolerance (±1 shade TCX), pilling grade target, shrinkage limits after wash, and the remedy policy when a lot fails. If the factory only offers “strict quality control” without numbers, the gap is yours to absorb. The sweater quality control checklist lists the checkpoints we apply line by line.
Certifications that carry in audits
For brand buyers and retail compliance teams, four certificates do most of the work: OEKO-TEX Standard 100 (harmful-substance testing on the finished textile), GOTS (organic fibre chain of custody), GRS (recycled content traceability) and BSCI amfori (social compliance audit). WRAP certification covers the production facility’s ethical manufacturing practices. Ask for certificate numbers and validity dates — auditors do.
FAQ
What does a knitwear manufacturer need from me to quote accurately?
Tech pack with gauge, yarn composition (fibre + micron), weight, size chart, colourways as Pantone TCX codes and target quantity per colour/style. With those six items a factory can quote MOQ, unit price bands and lead time without guessing.
How long do custom knitwear samples take?
10–15 days from approved spec when yarn is in stock, plus 5–7 days if yarn must be sourced and cone-dyed. Plan two sample rounds for first-time styles: one for fit, one for pre-production (PP) confirmation.
Can I mix gauges within one order?
Yes — gauge is a machine property, so a 3GG chunky sweater and a 12GG fine pullover can run in the same delivery window as long as yarns are scheduled together. MOQ stays 100 pcs per colour/style within each style.
What payment terms are standard?
30% deposit with order confirmation and 70% before shipment, which aligns risk once the PP sample is approved and bulk is scheduled.
Which numbers should a buyer check on a knitwear manufacturer spec sheet?
Read the spec sheet as a capability statement. Gauge range tells you which garments the floor can knit, from 3GG chunky to 18GG fine; yarn micron count tells you which fibre quality the price assumes, with 19.5 micron and below sitting in the luxury band; MOQ tells you the real entry cost, commonly 100 pieces per colour and style. Then check the process evidence: AQL 2.5 under ISO 2859-1, colour matched to Pantone TCX under D65, fabric weight per ASTM D3776, OEKO-TEX STANDARD 100 limit values on the finished article, and GOTS chain of custody where organic cotton is claimed.
Cogarm has manufactured custom knitwear and woven garments in Dongguan, Guangdong, China since 2006. Minimum order is 100 units per style and colourway.

[…] is described in the knitwear factory guide, and the program-level manufacturing context in the knitwear manufacturer guide. When in doubt, a proto at the target gauge costs days; discovering the wrong gauge at bulk costs […]