Quick answer: A shirt is decided by cloth and seam: fabric weight and count, marker efficiency, and a sewing line that holds stitch density and collar shape. Expect 200 pieces per colour and style, AQL 2.5 inspection, and colour matched to Pantone TCX within one shade.
A shirt manufacturer runs a different production system from knitwear: fabric rolls are inspected, cut to a marker, and sewn on lines where seam quality is the product. The numbers that shape a shirt program are MOQ (200 pcs per colour/style for woven garments), fabric selection, and the sewing-line QC plan your retail accounts will eventually audit. This guide covers the system end to end.
Cogarm manufactures woven shirts — alongside jackets, trousers and workwear — at a 200 pcs per colour/style MOQ, with AQL 2.5 inspection and Pantone TCX ±1 colour discipline shared across both its knit and woven lines.
Fabric first: the shirt is the cloth
Shirt quality is decided before sewing starts. The workable fabric families for volume programs: cotton poplin (crisp dress shirts), poly-cotton blends (easy care at volume), twill (heavier shirting and work shirts), canvas and ripstop (workwear), and T/C blends where cost leads. Each brings different shrinkage behaviour, needle policy and pressing requirements — the knit vs woven line management guide explains why woven QC anchors differ from knit.
- Fabric inspection: shade bands, weaving defects and roll-to-roll variance logged before cutting
- Shrinkage: fabric relaxed and tested before the marker is made, so bulk measurements hold after wash
- Colour: matched to Pantone TCX at ±1 shade, checked roll-to-roll to prevent shade-banding within one order
Cutting and marker efficiency
The cutting room lays up fabric in plies and cuts to a marker — the pattern layout that decides fabric utilization. Marker efficiency is why woven MOQ sits at 200 pcs per colour/style: markers and cutting changeover carry fixed cost that small runs absorb painfully. Buyers changing size ratios after the marker is planned reopen the efficiency math — which is one more reason the PP sample freeze matters.
Sewing-line quality anchors
On the sewing floor, four parameters define shirt quality: stitch density (stitches per inch, specified per seam), seam strength, collar and placket construction, and measurement tolerance against the approved sample. Buttonholes, buttons and interlinings each carry their own checkpoints. A written sewing spec — not “good stitching” — is what lets a factory reproduce your shirt across seasons. Custom sewing specs are covered in the cut-and-sew technical guide for OEM buyers.
Inspection follows AQL 2.5 sampling on the bulk lot, with measurement variance measured against the PP sample and colour under standardized lighting. For the audit trail, the station-level checks are in the garment factory vetting guide.
Finishing and lead times
Shirt finishing includes garment wash options (enzyme, stone, silicone for casual shirting), pressing, and packing to the buyer’s spec — polybag, fold board, carton marking. Lead times: sampling typically precedes bulk by one to two weeks, bulk runs in line with the standard woven window of 35–45 days from sample approval, and payment terms of 30% deposit / 70% before shipment align with the PP-sample gate. Compliance certificates (OEKO-TEX, BSCI, WRAP) should be quoted per program with validity dates.
FAQ
Why is shirt MOQ higher than knitwear MOQ?
Marker cutting and sewing-line changeover are fixed costs spread across units — hence 200 pcs per colour/style for woven versus 100 pcs for knitted garments. Consolidating colours is the standard way to lower effective entry volume.
What fabric should I choose for a private label dress shirt?
Cotton poplin for crispness, or a poly-cotton blend where easy care and price lead. Shrinkage behaviour — not hand feel — is the field that decides returns, so test on the PP sample before bulk.
Can one factory make both my knit and woven programs?
Yes, when the plant runs both machine parks under separate QC logic — one shipping consolidation, one compliance file, separate inspection references per line. See the dual-line clothing factory guide.
What should a shirt tech pack contain?
Fabric composition and weight, size chart per size, stitch density per seam, interlining placement, button/trim specs, wash finish, care labels and packing spec. Eight pages beats eighty of mood boards.
What should a buyer fix before a shirt program goes to bulk?
Fix the cloth first: fibre content, yarn count, fabric weight per ASTM D3776 and shrinkage after laundering, because a shirt that moves in the wash fails at the collar and the placket. Then fix construction: stitch density per centimetre, seam type, interlining for collar and cuffs, and points of measure with a 0.5 cm tolerance. Match colour to a Pantone TCX chip under D65, confirm OEKO-TEX STANDARD 100 limit values on the finished article, and inspect to AQL 2.5 under ISO 2859-1.
Cogarm has manufactured custom knitwear and woven garments in Dongguan, Guangdong, China since 2006. Minimum order is 100 units per style and colourway.
