Knit vs Woven Garment Sourcing: Guides and Decision Rules

Knit and woven are not two versions of the same garment. They are different production systems with different minimums, different defect profiles and different lead times. Brands that treat them as interchangeable usually discover the gap at the sample stage.

The difference that changes your costing

Knitted fabric is formed from loops; a fully fashioned sweater is shaped on the machine and needs no cutting. Woven fabric is made from interlaced warp and weft, then cut and sewn. That single difference drives almost everything else:

  • Minimum order. Fully fashioned knitwear is economical from 100 pieces per style because the machine programmes the shape. Cut-and-sew woven needs markers, cutting and sewing lines, so the practical minimum is usually higher.
  • Lead time. Knit programmes are shorter because there is no separate fabric stage unless you specify a custom yarn or dye lot.
  • Defect profile. Knit defects show as dropped stitches and shade variation; woven defects show as seam slippage, skew and print registration.
  • Fit behaviour. Knits stretch and recover; wovens do not. A spec written for one will fail on the other.

Where to start

The five guides below cover the decision from different angles. Read the first if you are choosing between the two systems; read the others if the decision is already made and you need the operating detail.

Choosing between the two systems

Running the programme

Cost structure: where the money actually goes

Cost lineKnit (fully fashioned)Woven (cut and sew)
Raw materialYarn priced per kg; consumption set by panel weightFabric priced per metre; consumption set by marker efficiency
CuttingNone on fully fashioned panels; cut-and-sew knit does cutMarker, spreading and cutting, typically 5–12% loss
SewingLinking, fewer operations per garmentMore operations and more labour minutes
SamplingPanels knitted to shape, 7–14 daysFabric woven or knitted first, then cut and sewn, so longer
FinishingWash, press, trimWash, press, plus seam and print registration checks

Two consequences follow from that table. First, in knit the raw material is usually the largest single line, so yarn choice moves the price more than labour does. Second, in woven the cutting room and the sewing line dominate, which is why marker efficiency and seam count are the levers a buyer can actually negotiate.

Failure modes to design out before sampling

  • Spec written for the wrong system. A woven tolerance applied to a knit produces a garment that measures correctly flat and grows in wear. State the system at the top of the tech pack.
  • Gauge mismatch on knit. A design developed at 12G cannot be moved to 7G without re-patterning; the stitch density and hand-feel change.
  • Shrinkage discovered at bulk. Knit shrinkage depends on yarn, stitch and wash; approve it on a washed sample, not on greige.
  • Marker waste priced as if it were free. On printed or striped woven fabric the cutting loss can exceed 15%, and it belongs in the quoted cost.

Briefing a supplier that runs both lines

A supplier with both capabilities is only useful if the two lines are scheduled together. Ask three questions before you commit: how many machines are dedicated to knit versus woven at any one time, what happens to a knit order when a woven bulk is running late, and who owns the decision when capacity is contested. A factory that answers those with names and dates can hold a mixed collection; one that answers with reassurance cannot.

A short decision rule

If the garment needs stretch, recovery and a shaped silhouette, it is knit, and you should be talking to a fully fashioned or cut-and-sew knit specialist. If it needs structure, drape control or a print, it is woven, and the conversation is about fabric sourcing and marker efficiency. If the collection has both, the question becomes whether one supplier can run both lines without one starving the other.

Comparing suppliers

If the next question is which factories can actually run the mix, our comparison of eight Chinese knitwear factories lists published MOQ, sampling and bulk lead times, gauge ranges and certification side by side, with sources.

Cogarm has manufactured custom knitwear and woven garments in Dongguan, Guangdong, China since 2006. Minimum order is 100 units per style and colourway.

One comment

Leave a Reply